Die-Cut Partitions for Ceramics and Glassware
Die-cut partitions are corrugated cell grids that hold each ceramic or glass piece in its own pocket. For crockery, tiles, bottles and glassware headed across India or for export, a partition keeps pieces from knocking together, which loose fill cannot guarantee. The one-time die is quoted on a call, then each run is priced on the board.
What are die-cut partitions?
A die-cut partition is a grid of slotted corrugated strips, or a cut sheet of cells, that sits inside a box and divides it into pockets. Each piece of crockery or glassware drops into its own cell, with a corrugated wall between it and the next piece. The grid is cut and slotted to your cell count and the height of the product, so the pack is built around the real item, not a rounded guess.
- A slotted grid or cut cell sheet, one pocket per piece.
- Cut to your cell count, product height and clearance.
- Run in the ply your load and stack height need.
- Pairs with a top pad and a right-sized outer carton.
- Cut from a one-time die, held on file for reorders.
A partition gives every piece its own cell, so the box is divided before a single item goes in.
Why do fragile goods ship in partitions?
Ceramics and glass fail when pieces touch each other or when they slide into a corner that takes a drop. A partition fixes each piece in position so it cannot move against its neighbour. The ledger sets a loose-fill pack against a partition grid on what actually happens in transit.
This is why a partition is the usual answer for a case of glasses, a set of plates or a tray of jars. Pair it with a top pad so nothing lifts out under vibration, and with a right-sized outer so the whole pack does not shift inside the box.
Partitions for ceramics, tiles and glassware
Different fragile goods want a different grid. Moradabad ships brassware and glass, Khurja and Bulandshahr ship pottery and ceramic ware, and Jaipur ships blue pottery and glass for export. The table maps common items to a typical partition build, which we then cut to your exact piece.
| Item | Typical build | Why |
|---|---|---|
| Plates and flat crockery | Vertical cell grid, snug width | Holds plates on edge so faces do not rub |
| Cups, mugs and bowls | Square cell grid plus a top pad | One piece per cell, pad stops lift-out |
| Glasses and stemware | Tall cell grid in 5 ply | Taller walls guard thin, tall sections |
| Tiles | Edge dividers and corner pads | Protects edges and corners from chipping |
| Jars and small bottles | Slotted bottle partition | Keeps necks and bodies from knocking |
How are die-cut partitions quoted?
A partition order has two numbers. First, the one-time die for the grid, quoted on a call or WhatsApp against your dieline or a sample, because the cost depends on the cell count and the number of cuts. Second, the running per-unit price, which follows the board: sheet area, ply and quantity. Send a sample or the piece dimensions and we design the cell to fit.
Prices attract 5% GST (HSN 4819); a GST invoice is issued with every order. For the general packing picture, see our ceramics and crockery packing guide; this page is about the partition itself. You approve a physical sample before any run.
Two numbers: a one-time die for the grid, then the per-unit board price on every run.
Frequently asked questions
What is a die-cut partition for boxes?
It is a grid of slotted corrugated strips, or a cut cell sheet, that divides a box into pockets so each ceramic or glass piece sits in its own cell. A corrugated wall stays between pieces, keeping them from knocking together in transit. We cut it to your cell count and product height, in the ply your load needs.
Are partitions better than loose fill for ceramics?
A partition fixes each piece in its own cell, so pieces cannot touch or slide into a corner, which loose fill cannot guarantee. Loose fill still has a place for odd single items, but for sets of plates, cups, glasses or tiles a cell grid holds the pack in position run after run.
Can you make die-cut ceramic boxes for Khurja or Moradabad?
Yes. We cut partitions and outers for pottery, ceramic ware and glass for makers in Khurja, Bulandshahr, Moradabad and Jaipur, factory-direct from NCR. Send the piece dimensions or a sample and we design the cell grid and the right-sized carton around it.
What ply should a partition and its box be?
It depends on the weight of the set and the stack height. Lighter crockery sits fine in a 3 ply grid and outer; heavier or export loads step up to 5 ply for taller, firmer cell walls. Share the product and how it ships and we match the ply to the load.
How do I get a price for a partition pack?
Send the piece dimensions, the cell count and your quantity on WhatsApp, or post a sample. We quote the one-time die against your grid and price the per-unit board from sheet area, ply and quantity. A person confirms usually in minutes, always within 24 hours, and you approve a sample first.